48 Series Modular Plastic Belt with Blade Stop

48s MPB with Blade Stop.webp

Blade Stops, commonly powered by air and affixed to conveyors, are employed to separate individual parts or pallets. Typically situated in between the lanes of a Muli-Lane Conveyor. They are commonly installed as single units to regulate product flow.

Blade Stops

48 Series Modular Plastic Belt Center Drive

48s MPB Center Drive.webp

A Center Drive Unit can be added to this style of conveyor. It can be located at any point along the length of the conveyor, allowing flexibility in its placement based on the specific needs of the application.

Center Drive

Custom Chute.webp

A Chute can be added to the end or side of the conveyor to facilitate the movement of products onto or off the conveyor. Depending on the specific requirements of your application, these Chutes can be constructed from a variety of materials. Common choices include Steel, Stainless Steel, or Plastic.

Chutes

48 Series Flat Belt End Drive with Cleated Blue Belt

48s FB End Drive with Cleated Blue Belt.webp

Special belts with cleats are available for applications requiring zoning, inclining, or declining parts while prevent sliding. For customized cleat configurations (heights, pitches, styles, etc.), kindly contact our factory for guidance.

48 Series Flat Belt End Drive with Cleated Incline

Cleated 48s FB Picture.webp

74 Series Flat Belt End Drive with Cleated Blue Belt with White Cleats

74S FB with Steel Stands.png

48 Series Flat Belt End Drive with Cleated

74s FB Cleated.png

Cleats

48 Series Modular Plastic Belt with Crowder

48s MPB with Crowder.webp

Crowders, typically air-powered and affixed to conveyors, serve the purpose of accurately positioning a part or pallet. These components are commonly integrated with robotic pick-up or vision systems to guarantee precise alignment of the product, ensuring utmost accuracy.

Crowders

48 Series Indexing Timing Belt Daul Lane Carrier Pins

48-Series-Indexing-Timing-Belt-Daul-Lane-Carrier-Pins-WebP.webp

A Carrier Plate can be affixed to an Indexing Timing Belt Conveyor to facilitate the installation of customized tooling. These Carrier Plates are engineered to align with the belt's pitch, enabling the design of tooling without being restricted by insert locations. They can be attached to a single lane or span across a conveyor with multiple lanes.

Custom Carrier Plates

Custom Chain

-48-Series-Timing-Belot-Red-Linatex-Cover-WebP.webp

To cater to the requirements of even the most challenging applications, a comprehensive range of varied covers and surface patterns are offered. These covers are sorted into six material groups: Elastomer/Rubber, PVC, Polyurethane, PET/Fleece, Foams, and other specialty materials.

Custom Cover Materials

74 Series Indexing Timing Belt Custom Drive

74-Series-Indexing-Timing-Belt-Custom-Drive-WebP.webp

Tailored Drive Packages are offered to enable customers to install their preferred gearbox or motor package. Servo motors commonly drive timing belts, and we have the capacity to modify our motor plates for mounting your specific motor.

Custom Drive Packages

48 Series Indexing Timing Belt Custom Fixture

48-Series-Indexing-Timing-Belt-Custom-Fixture-WebP.webp

Fixtures or attachments are uniquely crafted to secure a product onto an Indexing Timing Belt Conveyor. These Fixtures can be tailored to accommodate a product between a designated set of fixtures or to keep a product positioned atop a fixture. Custom fixtures are meticulously designed to suit specific products and are often constructed from materials such as Steel, Stainless Steel, Aluminum, or Plastic.
&nbsp;

48 Series Indexing Timing Belt with Aluminum Fixtures

48-Series-Timing-Belt-Guarding-Dog-House-Carriers-WebP.webp

48 Series Indexing Timing Belt with Cross Plate

48 Series Indexing Timing Belt with Delrin Pucks

48-Series-Indexing-Timing-Belt-Custom-Fixtures-Direct-Drive.webp

48 Series Indexing Timing Belt with Custom Fixtures

48-Series-Dual-Lant-Indexing-Timing-Belt-Custom-Slat-Fixture.webp

48 Series Indexing Timing Belt with Plastic V Blocks

48s-Indexing-Timing-BeltI-Side-Mount-Down-Fixtures.WebP.webp

74 Series Attachment Chain Dual Lane with Custom Steel Plates and Blocks

74-Series-Multi-Lane-Attachment-Roller-Chain-Custom-Slat-Block-Fixture-Direct-Drive-Steel-Stands.webp

74 Series Attachment Chain Dual Lane with Carrier Plates

74-Series-Attachment-Roller-Chain-Custom-Slat-Fixtures.webp

74 Series Attachment Chain Dual Lane with Custom Steel Tooling

74-Sereis-Dual-Lane-Attachment-Roller-Chain-Custom-Fixtures.webp

74 Series Attachment Chain Dual Lane with Turnkey Flipper and Tooling

74s-ATC-Engineered Solutions-Turnkey- System-Webp.webp

Custom Fixtures

74S FB Custom Rails WebP.webp

A selection of Standard Side Rail choices is available, accompanied by the option to create Custom Rails tailored to the specific application. The customization covers aspects like height, thickness, type, and material to perfectly suit the intended use. These Rails are usually crafted from materials such as Aluminum Extrusion, Steel, Stainless Steel, or Plastic.

Custom Side Rails

48s-Flat-Belt-Stacked-Stands.webp

If your application comes with requirements that go beyond the usual standards, we can design Stands that cater to your specific application needs. Whether you require the installation of Multiple Conveyors on a Shared Stand Frame or need Custom Mounting Brackets to attach to other equipment, we have the capability to offer you a suitable solution.

Custom Stands/Mounting

FB Auto Diverter WebP.webp

Product Diverters can be utilized with this type of conveyor to redirect the movement of products. These Diverters come in three variations: Fixed, Manual, or Automatic, depending on the specific demands of your application.

Diverters

74s FB Drip Pan WebP.webp

Drip Pans are available to be mounted beneath the conveyor, intended to capture debris, fluids, or other materials. These custom designed Drip Pans are created to encircle the conveyor, preventing fluid reaching the floor. Crafted from formed Steel, they match the dimensions of the conveyor. While the Drip Pans are usually powder coated black, we can accommodate a change to your preferred RAL color. Additionally, Stainless Steel Drip Pans are available upon request.
&nbsp;

Drip Pans

48 Series Flat Belt with White Urethane Belt and End Stop

48s FB with White Belt and End Stop.webp

A Hard Stop can be incorporated into the conveyor system. These Stops serve the purpose of retaining products while the conveyor belt remains in motion below. They can be constructed using materials like Aluminum Extrusion, Steel, Stainless Steel, or Plastic.

74 Series Flat Belt with White Urethane Belt and End Stop

74s FB End Stop.png

End Stop/Entrance Stops

48 Series Timing Belt Guarding Dog House Carriers

A customized Guarding package can be designed to prioritize operator safety. This involves installing enclosures, commonly known as "dog houses," at the equipment's ends to prevent fixtures from interacting with operators. Furthermore, protective barriers can be placed along the sides to cover sections with moving components, effectively preventing pinch points.

Guarding

74 Series Modular Plastic Belt with Divider Rails

74s MPB with Divider Rails.webp

Lane Dividers can be integrated into the conveyor system to establish separate lanes spanning the width of the belt. These dividers are custom designed to align with the requirements of your application. This includes the number of lanes as well as the spacing between the lanes.

Lane Dividers

Lift and Locate Assembly.webp

Lift and Locate devices, often powered by air, and attached to conveyors, play a crucial role in precisely positioning pallets or carriers. Often positioned between dual lanes, they elevate a pallet to achieve accurate placement. These elements are frequently integrated with robotic pick-up systems or positioned for manual operations to ensure the precise alignment of products.

Lift and Locates

Metering Stops.webp

Metering Stops, commonly powered by air and affixed to conveyors, are employed to separate individual parts from accumulated masses. Typically situated between dual lanes, they are commonly installed in pairs to regulate product flow towards an end stop or pneumatic device.

Metering Stops

48 Series Flat Belt with Nose Bar and White Belt

48s FB with Nose Bar and White Belt.webp

An option is available to include a Nosebar at the Tail End of the conveyor to facilitate convention part transferring. Our standard Nosebars have diameter of 12mm (0.5in). Please note that a Nosebar can only be installed on the side opposite to the motor. If you're interested in a double Nosebar setup, it necessitates the use of a center drive configuration.

Nosebar

Pallet.webp

Pallet

74s TB with Profiles.webp

A Profile is a Cleat or attachment that is welded onto a belt. It serves various purposes such as moving products, creating spacing between products, or securing products in place as the conveyor belt is in motion.

Profiles

48-Series-Modular-Plastic-Pusher-WebP.webp

Pushers, mounted on conveyors and usually air-powered, change the direction of transported products by 90&deg; when they reach the pusher's position. This redirection guides items onto an alternate route, such as another conveyor line, different processing zone, chute, or designated endpoint.

Pushers

48 Series Flat Belt with Standard Adjustable Side Rails

48s FB with Standard Adj. Side Rails.webp

Several stocked side rails options are available ranging&nbsp;from 20mm - 56mm.
Please chosse the rail type and desired side rail option.

48 Series Flat Belt with Standard 25mm SS Side Rail

48s ESD Belt copy.webp

48 Series Flat Belt Cleated with Adjustable Side Rails

48s Modular Plastic Conveyor Lift Gate with Fixed Side Rails

48-Series-Modular-Plastic-Lift Gate-WebP.webp

304 Stainless Steel Flat Top Side Flexing Chain Conveyor with Side Rails

65s-FTC-Stainless-Steel-Conveyor-WebP.webp

304 Stainless Flat Belt Conveyor with Side Rails

40s-FB-Stainless-Steel-WebP.webp

Side Rails

74 Series Flat Top Chain with Side Transfer

74s FTC with Side Transfer.webp

Side Transfer

Stands

74 Series Flat Belt with Black Belt and Steel Stands

74s FB with Black Belt and Steel Stands.webp

The option to upgrade our stands from Aluminum Extrusion to our 2in Tubular Steel Frame Weldment is available. The upgrade might be essential for supporting heavier loads or based on your preference. Our stands are initially powder coated black, but we can accommodate a switch to your preferred RAL color upon request.
&nbsp;
Please type in the desired Top of Conveyor Height.
Min: 610mm / Max: 1220mm

Steel Stands

74 Series Modular Plastic Belt with Transfer Piece

74s MPB with Transfer Piece.webp

Transfer Pieces, either in the form of Plates or Rollers, are strategically designed to assist in the seamless transition of parts from one conveyor to another, particularly in cases where your product is too small to bridge the gap effectively.

Transfer Pieces

primary

secondary

hover1

hover2

hover3

warning

box-border

box-border-hover

English

Spanish

Header2

GalleryWithFilters

12mm-Stainless-Steel-Round-Rod-Rail-WebP.webp

CATALOG

Description: 1/2" 304 Stainless Steel Round Rod Rail Unit: 150mm to 2438mm

1/2" Stainless Steel Round Rod Rail

100mm Table Mounting Bracket Outside Mount

C0318 100mm Table Mounting Bracket Outside Mount.png

Description: Unit: Qty. 1

124mm Table Mounting Bracket Outside Mount

C0321 124mm Table Mounting Bracket Outside Mount copy.png

162mm Table Mounting Bracket Outside Mount

C0322 162mm Table Mounting Bracket Outside Mount copy.png

20mm-Side-Rail-PA.0102.20-WebP.webp

Description: 20mm (0.8") Aluminum Side Rail with White UHMW Unit: 150mm to 2438mm

20mm Aluminum Rail with White Wear Strip

24mm-Side-Rail-Black-Wear-Strip-PA.01024.24.B-WebP.webp

Description: 24mm (0.9") Aluminum Side Rail with Black UHMW Unit: 150mm to 2438mm

24mm Aluminum Rail with Black Wear Strip

24mm Side Rail with White Wearstrip.png

Description: 24mm (0.9") Aluminum Side Rail with White UHMW Unit: 150mm to 2438mm

24mm Aluminum Rail with White Wear Strip

P0104 Alu Profile.png

Description: 24mm x 24mm Profile Aluminum Extrusion Unit: 150mm to 2438mm

24mm Extrusion

C0102-24mm x 28mm x 28mm Keyed-Angle-WebP.webp

Description: Angle (Keyed), Dimension: 24mm x 28mm x 28mm Unit: Qty. 8

24mm x 28mm x 28mm Keyed Angle

25mm-Side-Rail-PA.0102.25-WebP.webp

Description: 25mm (1") Aluminum Side Rail with White UHMW Unit: 150mm to 2438mm

25mm Aluminum Rail with White Wear Strip

38mm Side Rail PA.0102.38-WebP.webp

Description: 38mm (1.5") Aluminum Side Rail with White UHMW Unit: 150mm to 2438mm

38mm Aluminum Rail with White Wear Strip

C0126-48s-Extension-Plate-WebP.webp

Description: Extension Plate for 48s Conveyors (P0108 Profile) Unit: Qty. 1

Galería

Galería